manualshive.com logo in svg

Larson Davis System 824, Reference Manual

Share
Download
Larson Davis System 824 Reference Manual Download Page 310

9-32

824 Reference Manual

11/8/00

Once the data is in the spread sheet program it can be manip-
ulated, stored, and graphed using the standard spreadsheet
functions.

You can also export and/or save the translated data to a text
file, by selecting the Export Data menu item from the File
menu.

Additional Features

Store Histograms for Overall and Interval Data

One of the features of the 824 Utility software is the ability
to store histograms in both the LOG and SSA virtual instru-
ments for overall, interval, and daily data (LOG only). 

These settings can only be made
from the 824 Utility software.

To store an interval histogram for the SSA instrument, select
SLM&RTA from the measurement list, click on the “Interval
tab” and check the box by “Store complete Histogram”.

NOTE: Storing interval or daily histograms for the LOG
instrument is done in a similar manner.

Summary of Contents for System 824

























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands