Larson Davis System 824 Reference Manual Download Page 237

Page: 237 / 536

11/8/00

Using ID Setting Files

7-57

Graph Menu

There are two Graph settings available:

Graph Level may also be changed
interactively with the Adjust Graph
display (below).

The Graph Level setting allow you to change the base level
of the SPL history graph. The following is the possible set-
ting range:

-39 to 799

The Graph Scale setting allows you to change the vertical
range of the SPL history graph, using the following possible
settings:

2, 1, 1/2, 1/4, 1/8 dB per dot (pixel)

Pressing the

arrow key on the Graph menu item allows

you to adjust the graph settings through a menu. A screen
similar to the following appears:

The

key allows you to

adjust the Graph Level. The

key allows you to adjust the

Graph Scale. When you are finished
customizing the settings of the
graph, press the

key to finish.

Pressing the

key on Graph menu item (from the SLM

Check menu) allows you to graphically and interactively
adjust the Graph settings. A screen similar to the followings
appears:

Menu Items

Available Settings Options

Graph Level

-39 to 799

Graph Scale

2, 1, 1/2, 1/4, 1/8

Summary of Contents for System 824

























































































































































































































































































































































































































































































































































Search results

Summary of Contents for System 824

Reviews:

Brands by name

Popular brands

Larson Davis System 824, Reference Manual

Search results

Summary of Contents for System 824

Reviews:

Brands by name

Popular brands