Larson Davis System 824, Reference Manual

Page: 102 / 536

4-14 824 Reference Manual 11/8/00
Preparing for a Measurement
If the Active ID will provide the desired measurement, press
either the Setup
S
key or
l
to exit from the Setup menu.
The System 824 is now ready to perform a measurement
according to the Setup represented by the Active ID.
If the Active ID is not satisfactory for the measurement, the
following options are available:
• 1. Modify the Active ID as required
• 2. Select and use a different ID (make it the Active ID)
• 3. Select a different ID, make it the Active ID, and mod-
ify it as required.
Selecting a Different ID
Use the
d
and
u
keys to highlight the desired ID and
make it the Active ID by pressing the
c
Check key. This
will activate that ID, exit the Setup menu, and display the
main data view. The instrument is ready to perform a mea-
surement by pressing
s
Run/Stop.
Accessing the Settings Menu
It is within the Settings menu and its associated Sub-menus,
that the settings associated with the measurement are
defined. Sound level measurements are made in the ISM
LOG, and SSA Instrument Types, so all of these will include
In d ic a te s ID is w rite
p ro te c te d