manualshive.com logo in svg

Larson Davis System 824, Reference Manual

Share
Download
Larson Davis System 824 Reference Manual Download Page 281

11/8/00

Using the 824 Utility Software

9-3

plugs into the Serial port of the 824 and the 9-pin connector
plugs into a serial port on your computer. 

You do not need to be connected to
the 824 in order to translate files
which have already been down-
loaded.

Before any functions can be performed on the 824, you must
connect the 824 to the 824 Utility software. To connect to
the 824:

Step 1

Attach the CBL006 to the 824 and to the serial 
port on the computer as described earlier.

Step 2

Start the 824 Utility program.

NOTE: The 824 will power on when it
senses anything on the serial connector.
You may notice the 824 powering on
automatically before you press the power
button.

Step 3

Power on the 824. 

Step 4

Press the Connect button on the tool bar.

Step 5

The connect dialog box will appear.

Summary of Contents for System 824

























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands