Larson Davis System 824 Reference Manual Download Page 183

Page: 183 / 536

11/8/00

Using ID Setting Files

7-3

If you have not already saved your
data, you will be prompted to save it
at this step.

Step 2

Select SLM&RTA SSA from the menu by using
the

keys and then pressing the

Check key. The SLM+RTA screen appears:

The System 824 is now set to the SLM&RTA (SSA) instru-
ment.

Step 3

To access the Settings menu, press the

Setup

key. The Edit Settings: SLM&RTA SSA is high-
lighted as the Setup menu appears:

Step 4

Press the

key and the Settings menu for the

SLM&RTA (SSA) instrument appears:

Summary of Contents for System 824

























































































































































































































































































































































































































































































































































Search results

Summary of Contents for System 824

Reviews:

Brands by name

Popular brands

Larson Davis System 824, Reference Manual

Search results

Summary of Contents for System 824

Reviews:

Brands by name

Popular brands