Larson Davis System 824 Reference Manual Download Page 246

Page: 246 / 536

7-66

824 Reference Manual

11/8/00

Other Logging (LOG) Check Menus

See page 7-55 for a description of
the (LOG) SLM check menu.

This section presents the LOG instrument’s available Check
menus that are in addition to the SLM Check menu previ-
ously described in this chapter.

Any Data Check Menu

See page 7-58 for a description of the “Any Data” check
menu.

Current SLM / Overall SLM
Check Menu

Current SLM and Overall SLM views have access to the
following Check menu:

Exposure Check Menu

The Exposure view has access to the following Check
menu:

Menu Items

Purpose

Mark

Puts a marker in the time history
record if the check

key is pressed.

If the right

arrow key is pressed it

puts you in the Marker screen.

Settings

Modifies the SLM settings for the
selected instrument.

Graph

Changes the scaling of the instru-
ment’s SLM history graph.

TWA

Modifies the TWA settings for the
selected instrument.

Summary of Contents for System 824

























































































































































































































































































































































































































































































































































Search results

Summary of Contents for System 824

Reviews:

Related manuals for System 824

Brands by name

Popular brands

Larson Davis System 824, Reference Manual

Search results

Summary of Contents for System 824

Reviews:

Related manuals for System 824

Brands by name

Popular brands