Larson Davis SoundTrack LxT, User Manual

Page: 50 / 307

LxT Manual Measurement Settings Tabs
4-13
the following sections are for setups without Measurement
History enabled.
When Measurement History is not enabled, the
measurement must be manually stored at the conclusion of
the duration. Because only a single measurement exists, the
data displayed on the
Overall and Current tabs is identical.
Continuous
The Continuous run mode is similar to the Manual Stop
mode, except that Daily Auto-Store can also be enabled, in
which case daily measurement reports for 24-hour time
periods are automatically stored. The user specifies a
beginning time for such periods. This also presumes that the
measurement time period encompasses at least one 24-hour
time period as programmed. The parameter
Time defines the
start time for the 24-hour time period to be used for the
report.
Single Block Time or Daily Timer
When the run mode is Single Block Timer or Daily Timer ,
the single measurement consists of data measured over
different blocks of time between the start date and time and
the end date and time.