Larson Davis SoundTrack LxT User Manual Download Page 172

Page: 172 / 307

LxT Manual

Locked With Auto-Store

13-5

Also, while fully locked, pressing the

(RUN/PAUSE)

key starts a measurement with the message box shown in
FIGURE 13-6.

FIGURE 13-6 Measurement While Locked Message

Selecting

Yes

begins the measurement. A measurement

cannot be paused, stopped or stored in the Fully Locked
mode.

Locked With Auto-Store

If the Locked w/Auto-Store mode has been selected, upon
accepting the changes on the Lock display, the screen
appears as shown in FIGURE 13-7.

FIGURE 13-7 Locked with Auto Store or Manual

Store

In this mode, measurements may be started by pressing the

key. A measurement may not be paused or stopped.

Summary of Contents for SoundTrack LxT




















































































































































































































































































































Search results

Summary of Contents for SoundTrack LxT

Reviews:

Brands by name

Popular brands

Larson Davis SoundTrack LxT, User Manual

Search results

Summary of Contents for SoundTrack LxT

Reviews:

Brands by name

Popular brands