Larson Davis SoundTrack LxT, User Manual

Page: 48 / 307

LxT Manual Measurement Settings Tabs
4-11
• Daily Timer: The measurement is initiated manually by
pressing the
9
key and is stopped by pressing the
7
key. Measurements are made only during the separate
time blocks defined by the setup.
When the Control tab is opened, the Run Mode field is
already selected. Press
5
to open the Run Mode Menu, as
shown in Figure 4-10.
FIGURE 4-10 Run Mode Menu
Navigate to select the desired mode and press
5
to make
the selection. The screen then appears as one of those shown
in Figure 4-11, depending upon the mode selected. For the
Timed Stop and Stop When Stable modes, further
information must be entered.
Manual, Timed Stop, or Stop When Stable Modes
When the run mode used is Manual , Timed Stop or Stop
When Stable , a single measurement runs continuously from
start time to end time. The selection and setting of
parameters for these run modes is shown in FIGURE 4-11.
FIGURE 4-11 Setup of Manual Stop, Timed Stop, and Stop When Stable Run Modes