Larson Davis SoundTrack LxT, User Manual

Page: 182 / 307

LxT Manual File System
15-3
PC. If a problem is detected, an attempt is made to repair the
problem.
Format
Selecting this function formats the internal data storage area
in the memory of the LxT. This operates similar to the
Format function on a PC. System and measurement settings
are preserved.
Format & Restore Defaults
User calibrations and calibration
history data are erased when the
Format & Restore Defaults function
is implemented. Selecting this function formats the internal data storage area
in the memory of the LxT. The LxT is then restored to
factory settings.
The Format and Format & Restore Defaults function erases
all internal data files, but does not affect data stored in USB
memory.
Check/Repair USB
Always shut down the LxT
completely before unplugging USB
power connections. Otherwise,
memory faults and memory wear
may occur more quickly over time. If you believe that the USB mass storage is corrupt, this
utility can be used to check and repair the corrupted sectors
of the USB mass storage device. Set the USB Host Port to
ON, insert the USB mass storage device into the USB
connector and run this utility. When the action has been
completed, the message shown in FIGURE 15-3 is
displayed.
To avoid creating Flash Memory
corruption errors, do not unplug
USB drives from the USB port on the
LxT while the drive is being copied,
or if the LxT is within Data Explorer
mode.
FIGURE 15-3 USB Check/Repair Done Message
If you still believe that the USB mass storage device is
corrupt, a Format USB operation should be performed.