LT-3100 User & Installation Manual Rev. 1.06
System Services
Lars Thrane A/S
www.thrane.eu
Page 75 of 155
The user can now either press ‘Pair’ to pair with the device or ‘Reject’ to reject pairing with the device. The
‘Pair’
softkey is pressed and the device (in this case an iPhone) is connected. The LT-3110 will now display
the Bluetooth symbol as displayed on Figure 90.
The connected device (in this case the iPhone) will now be displayed under
‘
Known
Devices’
at the bottom
of the Bluetooth submenu, this is displayed on Figure 91.
To disconnect the device from the LT-3100 the user can either disable Bluetooth on the LT-3110 Control
Unit or the paired device or press the
‘Forget’
softkey. Using the
‘Forget’
softkey will remove the device
from the list as seen on Figure 92.
Figure 89: Bluetooth - How to pair (2 of 5)
Figure 90: Bluetooth - How to pair (3 of 5)
Figure 91: Bluetooth - How to pair (4 of 5)
Bluetooth pairing
request, press ‘Pair’ to
pair
Bluetooth is enabled and
a device is connected
The connected device is
shown under ‘Known
Devices’. Press ‘Forget’ to
remove the device
Summary of Contents for LT-3100
Page 2: ......
Page 167: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...
