LT-3100 User & Installation Manual Rev. 1.06
Installation and Mounting
Lars Thrane A/S
www.thrane.eu
Page 20 of 155
The
Bracket Mount (1.5” to 2.5”
pipe), Antenna Unit installation options are illustrated in Figure 19 to
Bracket mount installation procedure:
1.
Fasten the bracket mount to a pipe
(max. 2.5“
pipe) by using the two V-bolts and the M8 prevailing
nuts, as illustrated in Figure 22 on page 21 (max torque = 5.5 Nm)
2.
Screw on the LT-3130 Antenna Unit and secure the antenna lock pinot (max torque = 1.2 Nm)
3.
Fasten the coaxial cable to the LT-3130 Antenna Unit (N connector)
4.
Apply self-volcanic tape on the N connector and cable to protect against saltwater and corrosion or
use the recommended Cable Hose
NOTE
:
Always fasten the Bracket Mount, Antenna Unit (1.5” to 2.5”
pipe) to the pipe, before
installing the LT-3130 Antenna Unit (the antenna unit and bracket mount are fastened
together by the thread lock). Remember to secure the pinot screw after the antenna unit
has been fastened. The torques are specified in Figure 22 on page 21.
NOTE
:
The Bracket Mount (1.5” to 2.5”
pipe), Antenna Unit interfaces to a pipe of maximum 2.
5”
(63.5 mm), measured outer diameter.
Figure 20: Bracket Mount
(1.5” to 2.5”
pipe), Antenna Unit
–
vertical pipe mount.
Figure 19:
Bracket Mount
(1.5” to 2.5”
pipe)
,
Antenna Unit
–
vertical pipe mount.
Summary of Contents for LT-3100
Page 2: ......
Page 167: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...
