SLC™ Console Manager User Guide
47
6:
Basic Parameters
This chapter describes how to set the following basic configuration settings for the SLC console
manager using the SLC web interface or CLI:
Network parameters that determine how the SLC console manager interacts with the attached
network
Firewall and routing
Date and time
Note:
If you entered some of these settings using a Quick Setup procedure, you may
update them here.
This chapter contains the following sections:
Requirements for IP Address Assignment
Network Settings
IP Filters
Routing
Note:
The features and functionality described in this chapter specific to PC Card use
are supported on SLC -02 part numbers. The features and functionality specific to USB
port use are supported on SLC -03 part numbers.
Requirements for IP Address Assignment
If you assign a different IP address from the current one, it must be within a valid range, unique to
your network, and with the same subnet mask as your workstation.
To configure the unit, you need the following information:
Eth1
IP address:
________. ________ . ________ .________
Subnet mask:
________. ________ . ________ .________
Eth2
IP address (optional):
________. ________ . ________ .________
Subnet mask (optional):
________. ________ . ________ .________
Gateway:
________. ________ . ________ .________
DNS:
________. ________ . ________ .________
Summary of Contents for SLC8
Page 49: ...6 Basic Parameters SLC Console Manager User Guide 49 Figure 6 1 Network Web Page...
Page 84: ...8 Devices SLC Console Manager User Guide 84 Figure 8 3 Device Ports Settings Page...
Page 121: ...9 PC Cards SLC Console Manager User Guide 121 Figure 9 3 PC Card Modem ISDN Page...
Page 135: ...11 Connections SLC Console Manager User Guide 135 Figure 11 5 Console Server...
