4: Quick Setup
SLC™ Console Manager User Guide
36
Date & Time Settings
Administrator Settings
6.
To save your entries, click the
Apply
button.
Method # 3 Quick Setup on the Command Line Interface
If the SLC console manager does not have an IP address, you can connect a dumb terminal or a
PC running a terminal emulation program (VT100) to access the command line interface (CLI).
See
Connecting to Terminals on page 28
If the unit has an IP address, you can use SSH or Telnet
to connect to the SLC device.
Note:
By default, Telnet is disabled and SSH is enabled. To enable Telnet, use the
Services web page (see
Chapter 7: Services
), a serial terminal connection, or an SSH
connection.
IP Address
If specifying an IP address, enter an IP address that will be unique and valid on your
network. There is no default.
Enter all IP addresses in dot-quad notation. Do not use leading zeros in the fields for
dot-quad numbers less than 100. For example, if your IP address is 172.19.201.28,
do not enter 028 for the last segment.
Note:
Currently, the SLC console manager does not support configurations with the
same IP subnet on multiple interfaces (Ethernet or PPP).
Subnet Mask
If specifying an IP address, enter the network segment on which the SLC device
resides. There is no default.
Default Gateway
The IP address of the router for this network. There is no default.
Hostname
The default host name is slcXXXX, where XXXX is the last 4 characters of the
hardware address of Ethernet Port 1. There is a 64-character limit (contiguous
characters, no spaces). The host name becomes the prompt in the command line
interface.
Domain
If desired, specify a domain name (for example, support.lantronix.com). The domain
name is used for host name resolution within the SLC console manager. For
example, if abcd is specified for the SMTP server, and mydomain.com is specified
for the domain, if abcd cannot be resolved, the SLC device attempts to resolve
abcd.mydomain.com for the SMTP server.
Change Date/
Time
Select the checkbox to manually enter the date and time at the SLC location.
Date
From the drop-down lists, select the current month, day, and year.
Time
From the drop-down lists, select the current hour and minute.
Time Zone
From the drop-down list, select the appropriate time zone.
Sysadmin
Password/
Retype
Password
To change the password (e.g., from the default), enter a password of up to 64
characters.
Summary of Contents for SLC8
Page 49: ...6 Basic Parameters SLC Console Manager User Guide 49 Figure 6 1 Network Web Page...
Page 84: ...8 Devices SLC Console Manager User Guide 84 Figure 8 3 Device Ports Settings Page...
Page 121: ...9 PC Cards SLC Console Manager User Guide 121 Figure 9 3 PC Card Modem ISDN Page...
Page 135: ...11 Connections SLC Console Manager User Guide 135 Figure 11 5 Console Server...
