SLC™ Console Manager User Guide
288
Appendix I: LDAP Schemas
This appendix describes the procedure for defining individual user permissions from a Windows
Active Directory (AD) server to use with the SLC console manager firmware version 5.4 or greater.
The procedure outlined in this appendix is based on Windows Server 2003 and 2008 and can vary
with other Windows versions.
Note:
In this appendix, the terms “rights and permissions” are used interchangeably.
This appendix contains the following sections:
Installing Schema Support in Window AD Server
Creating the SLC Schema Attribute
Adding the Attribute to the Users Group in Windows
Adding the Permissions to the Individual User
Values to Use
String Format
Installing Schema Support in Window AD Server
To install schema support in a Windows AD server for the SLC console manager, follow the steps
contained in the document at
http://technet.microsoft.com/en-us/library/cc731628.aspx
.
Or perform the following steps that were copied from the website above.
1.
Open a command prompt and type
regsvr32 schmmgmt.dll
.
2.
Press Enter.
Figure I-1
shows the window that displays.
Summary of Contents for SLC8
Page 49: ...6 Basic Parameters SLC Console Manager User Guide 49 Figure 6 1 Network Web Page...
Page 84: ...8 Devices SLC Console Manager User Guide 84 Figure 8 3 Device Ports Settings Page...
Page 121: ...9 PC Cards SLC Console Manager User Guide 121 Figure 9 3 PC Card Modem ISDN Page...
Page 135: ...11 Connections SLC Console Manager User Guide 135 Figure 11 5 Console Server...