10: Services Settings
EDS User Guide
83
2. Enter or modify the following settings:
Syslog Page
Settings
Description
Syslog
Select to enable or disable the syslog.
Host
Enter the IP address of the remote server to which system logs
are sent for storage.
Local Port
Enter the number of the local port on the EDS from which
system logs are sent.
Remote Port
Enter the number of the port on the remote server that supports
logging services. The default is 514.
Severity to
Log
From the drop-down box, select the minimum level of system
message the EDS should log. This setting applies to all syslog
facilities. The drop-down list is in descending order of severity
(e.g., Emergency is more severe than Alert.). Message logging
will include all severities up to the selected level. Selecting the
Debug severity will log all system message.
HTTP Configuration
Hypertext Transfer Protocol (HTTP) is the transport protocol for communicating
hypertext documents on the Internet.
HTTP defines how messages are formatted and transmitted. It also defines the
actions web servers and browsers should take in response to different commands.
This page has three links at the top for viewing statistics and for viewing and
changing configuration and authentication settings.
HTTP Statistics
Note
: The HTTP log is a scrolling log, with the last Max Log Entries cached and
viewable. You can change the maximum number of entries that can be
viewed on the HTTP Configuration Page.
