9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
60
Tunnel -
Accept Mode
Page Settings
Description
only alphanumeric characters and punctuation. When set, the
password sent to the EDS must be terminated with one of the
following: (a) 0x0A (LF), (b) 0x00, (c) 0x0D 0x0A (CR LF), or
(d) 0x0D 0x00.
Prompt for
Password
Indicate whether to prompt the user for the password upon
connection.
On = prompt for a password upon connection.
Off = do not prompt for a password upon connection.
3. Click Submit.
Packing Mode
When in Packing Mode, data is not transferred one byte at a time. Instead, data is
queued and sent in segments.
Configure the Tunnel Packing Mode:
1. Select Tunnel n and Packing Mode at the top of the page. The Tunnel n
Packing Mode page appears. Depending on the Mode selection, different
configurable parameters are shown.
The following figures show the display for each of the three packing modes.