9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
53
Configure Line n:
1. Click Line n and Configuration. The Line n Configuration page appears.
Figure 9-2. Line n Configuration
2. Enter or modify the following settings:
Line -
Configuration
Page Settings
Description
Name
Enter a name for the line. The default Name is blank.
State
Indicates whether the current line is enabled. To change the
state, select Enabled or Disabled from the drop-down menu.
Protocol
Select the protocol from the drop-down menu. The default is
Tunnel.
Baud Rate
Select the baud rate from the drop-down menu. The default
is 9600.
Parity
Select the parity from the drop-down menu. The default is
None.
Data Bits
Select the number of data bits from the drop-down menu.
The default is 8.
Stop Bits
Select the number of stop bits from the drop-down menu.
The default is 1.
Flow Control
Select the flow control from the drop-down menu. The
