9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
70
Disconnect Mode
Disconnect Mode is disabled by default. When enabled, Disconnect Mode runs in the
background of an active connection to determine when a disconnection is required.
Configure the tunnel Disconnect Mode:
1. Click Tunnel n and Disconnect Mode at the top of the page. The Tunnel n
Disconnect Mode page appears.
Figure 9-13. Tunnel n Disconnect Mode
2. Enter or modify the following settings:
Tunnel – Disconnect
Mode Page Settings
Description
Character Stop
Select Enabled to disconnect upon receiving the stop
character. (See
Start and Stop Characters on page 69
for instructions on configuring the stop character.)
Modem Control
Select Enabled to disconnect when the modem control
pin is not asserted on the serial line.
Timeout
Enter a time, in milliseconds, for the EDS to disconnect
on a timeout. The value 0 (zero) disables the idle
timeout.
Flush Serial Data
Select Enabled to flush the serial data buffer on a
disconnection.
3. Click Submit.
