9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
75
Terminal on Line
Configuration
Page
Description
Echo
Applies only to Connect Mode Telnet connections, not to
Accept Mode. Only disable Echo if your terminal echoes,
in which case you will see double of each character
typed.
3. Click Submit.
Host Configuration
This page shows current settings for a remote host and lets you change these
settings. Use these settings to add host destinations to the Login Connect Menu.
1. Click Host on the menu and then click the desired host at the top of the page.
Configuration is automatically selected. (Host 1 is the default.) The Host
Configuration page appears.
Figure 9-17. Host Configuration
2. Enter or modify the following settings:
Host Page
Settings
Description
Name
A name for the host. This name appears on the Login Connect
Menu. To leave a host out of the menu, leave this field blank.
Protocol
The protocol to use to connect to the host. Choices are:
Telnet
SSH
Note:
SSH keys must be loaded or created on the SSH page
for the SSH protocol to work.
SSH
Username
Appears if you selected SSH as the protocol.
Enter a username to select a pre-configured
Username/Password/Key (configured on the SSH: Client Users
page),
—Or—
Leave it blank to be prompted for a username and password at
connect time.
