9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
76
Host Page
Settings
Description
Remote
Address
IP address for the host.
Remote Port
Port on the host to which the EDS will connect.
3. Click Submit.
Login Connect Menu
As an administrator, you can set up a menu on the EDS for terminal users.
For a terminal attached to serial Line N, set as follows:
Line[N] Protocol = None
Line[N] Command Mode = Always
Terminal[Line N] Login Connect Menu = Enabled.
For Telnet-attached terminals, set:
Terminal [Network] Login Connect Menu = Enabled.
You will see a menu like this:
1. Add a destination serial line M to the menu by filling in Line[M] Name. For this
purpose, set:
Line[M] Protocol = None
Line[M] Command Mode = Disabled.
2. Add a network destination to the menu by setting up a Host entry for it. Each
named Host entry will appear in the menu.
3. Add the Exit to command line interface choice to the menu by setting:
Terminal[Line N] or Terminal[Network] Exit Connect Menu = Enabled.
The Log out choice is always present.
Preview the Login Connect Menu
The Login Connect Menu can be previewed without actually connecting in via a serial
line or telnet connection.
Password :
Connection menu: (select by number)
1) Alpha 2) Beta
3) Exit to command line interface 4) Log out
Selection =
