12: Maintenance and Diagnostics Settings
EDS User Guide
108
ARP Settings
On the ARP page, you set the maximum time an address remains in the cache, and
you specify both the IP and MAC addresses for the ARP cache. Both addresses are
required.
Figure 12-6. ARP Protocol Page
1. Enter the time, in hours, minutes and seconds, for the timeout.
2. Enter the IP address to add to the ARP cache.
3. Enter the MAC address to add to the ARP cache.
4. Click Add after supplying both fields.
Under Current State, select Remove All to remove all entries in the ARP
cache, or select Remove to remove a specific entry from the ARP cache.
