Lantronix EDS-MD Series, Command Reference Manual

Page: 415 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 415
remote port <number>
Sets the remote port used to connect to the host.
<number> = port to be used.
show Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
ssh username <text>
Sets the username for logging into the host via
SSH. <text> = username.
write
Stores the current configuration in permanent
memory.
host 21 (config-host:21) level commands
clrscrn Clears the screen.
default protocol Restores the default value of the protocol (Telnet).
default remote port
Sets the remote port (used to connect to the host) to
the default value, which depends on the selected
protocol.
exit Exits to the configuration level.
host <number> Change to config host level
name <text>
Sets the name of the host. <text> = name of the
host.
no name Clears the name of the host.
no remote address Clears the remote address of the host.
no ssh username Clears the SSH username associated with the host.
protocol ssh Sets the protocol to SSH.
protocol telnet Sets the protocol to Telnet.
remote address <text>
Sets the IP address of the remote host to connect to
when this host is selected on the login connect
menu. <text> = IP address.
remote port <number>
Sets the remote port used to connect to the host.
<number> = port to be used.
show Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
ssh username <text>
Sets the username for logging into the host via
SSH. <text> = username.
write
Stores the current configuration in permanent
memory.
host 22 (config-host:22) level commands
clrscrn Clears the screen.
default protocol Restores the default value of the protocol (Telnet).
default remote port
Sets the remote port (used to connect to the host) to
the default value, which depends on the selected
protocol.
exit Exits to the configuration level.
host <number> Change to config host level
name <text>
Sets the name of the host. <text> = name of the
host.
no name Clears the name of the host.
no remote address Clears the remote address of the host.
no ssh username Clears the SSH username associated with the host.