Lantronix EDS-MD Series, Command Reference Manual

Page: 121 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 121
host <text> Sets the Hostname or IP address of Mach 10.
mqtt host <text> Sets the Hostname or IP address of MQTT server.
mqtt port <number> Sets the Port of MQTT server.
mqtt security disable Disables SSL for MQTT.
mqtt security enable Enables SSL for MQTT.
mqtt state disable Disables MQTT.
mqtt state enable Enables MQTT.
no proxy host
Restores the Hostname or IP address of the proxy
server.
no proxy password Restores the password for proxy server.
no proxy username Clears the user name for the proxy server.
port <number> Sets the Port of Mach 10.
proxy host <text>
Sets the Hostname or IP address of the proxy
server.
proxy password <text> Sets the password the proxy server.
proxy port <number> Sets the Port of the proxy server.
proxy type socks5 Sets the Proxy server type to SOCKS5
proxy username <text> Sets the user name for the proxy server.
secure port disable Disables https for Mach10 client.
secure port enable Enables https for Mach10 client.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
use proxy disable Disables use of proxy server for this connection.
use proxy enable Enables use of proxy server for this connection.
validate certificates disable Disables certificate validation for Mach10 client.
validate certificates enable Enables certificate validation for Mach10 client.
write
Stores the current configuration in permanent
memory.
connection 1 (config-action-http_post-connection:eth2 link state change:1) level commands
clrscrn Clears the screen.
default port Sets default Port number.
default protocol Sets default HTTP Protocol.
exit Exits to the next higher level.
host <text>
Sets HTTP server IP address or hostname to be
connected to.
no host Clears HTTP server IP address or hostname.
no password Clears the Password.
no url Clears HTTP request URL.
no username Clears the Username.
password <text> Sets the Password used to logon to HTTP server.
port <number>
Sets the Port number which HTTP server is listening
to.
protocol http Selects HTTP Protocol.
protocol https Selects HTTPS Protocol.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.