Lantronix EDS-MD Series, Command Reference Manual

Page: 128 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 128
filename <text> Sets FTP remote Filename.
host <text>
Sets FTP server IP address or hostname to be
connected to.
no host Clears FTP server IP address or hostname.
no password Sets default Password.
password <text> Sets the Password used to logon to FTP server.
port <number>
Sets the Port number which FTP server is listening
to.
protocol ftp Selects FTP Protocol.
protocol ftps Selects FTPS Protocol.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username <text> Sets the Username used to logon to FTP server.
write
Stores the current configuration in permanent
memory.
credentials (ssl-credentials) level commands
clrscrn Clears the screen.
create <credential name> Create a new credential name
delete <credential name> Delete existing credential by name
edit <credential name> View or edit an existing credential
exit Exits to the ssl level.
show Show existing credential names
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
device (device) level commands
auto show tlog Continuously displays the internal trouble log.
clrscrn Clears the screen.
default long name Restores the default product long name.
default short name Restores the default product short name.
exit Exit to the enable level.
long name <name>
Sets the product long name, displayed in command
mode and the Web interface.
short name <name>
Sets the product short name, displayed in command
mode and the Web interface. <name> = maximum
of eight characters.
show Show system information
show hardware information Displays information about the hardware.
show history
Displays the last 20 commands entered during the
current CLI session.
show lines Show line information
show memory Displays current memory usage information.
show task state Displays current task states.
show tlog Displays the internal trouble log.
write
Stores the current configuration in permanent
memory.