Lantronix EDS-MD Series, Command Reference Manual

Page: 688 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 688
show history
Displays the last 20 commands entered during the
current CLI session.
threshold <bytes>
Sets the threshold (byte count). If the queued data
reaches this threshold then the data will be sent.
<bytes> = number of bytes in the threshold.
timeout <milliseconds>
Sets the timeout value for packing mode in
milliseconds. <milliseconds> = timeout value, in
milliseconds.
trailing character <control>
Sets the trailing character for packing mode. The
character may be input as text, control, decimal, or
hex. A control character has the form <control>C. A
decimal value character has the form \99. A hex
value character has the form 0xFF.
write
Stores the current configuration in permanent
memory.
password (tunnel-accept-password:16) level commands
clrscrn Clears the screen.
exit Exits to the next higher level.
no password
Removes the password so connections will be
accepted unchallenged.
password <text>
Sets the password required on the network side of
the tunnel to begin a connection.
prompt disable
Inhibits any prompting for password on the network
side of the tunnel.
prompt enable
Sets up so a user on the network side of the tunnel
will be prompted for a password.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
password (tunnel-accept-password:15) level commands
clrscrn Clears the screen.
exit Exits to the next higher level.
no password
Removes the password so connections will be
accepted unchallenged.
password <text>
Sets the password required on the network side of
the tunnel to begin a connection.
prompt disable
Inhibits any prompting for password on the network
side of the tunnel.
prompt enable
Sets up so a user on the network side of the tunnel
will be prompted for a password.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
password (tunnel-accept-password:14) level commands
clrscrn Clears the screen.