Lantronix 4120 Series, User Manual

Page: 99 / 142

Lantronix x4120 User Guide
33551 Rev. C https://www.lantronix.com/
Page
99
of
142
Message :
add vlan-db vid=100 priority=0 pri-override=disable failed
Response : 1. Check if this command is supported. 2. If the problem persists, contact Technical Support.
Message
:
add vlan-db vid=200 priority=0 pri-override=disable failed
Response : 1. Check if this command is supported. 2. If the problem persists, contact Technical Support.
Message
:
set acl state=disable failed
Response : 1. Check if this command is supported. 2. If the problem persists, contact Technical Support.
Message
:
set acl table=filter chain=input policy=accept failed
Response : 1. Check if this command is supported. 2. If the problem persists, contact Technical Support.
Message
:
set dot1dbridge ip-priority-index=0 remap-priority=0 failed
Response : 1. Check if this command is supported. 2. If the problem persists, contact Technical Support.
Message:
AGENT PM ERROR: CLI command show dot1dbridge ip-tc priority remapping
failed
Response : 1. Check if this command is supported. 2. If the problem persists, contact Technical Support.