Lantronix
x4120 User Guide
33551 Rev. C
Page
59
of
142
CLI Messages
The following are messages that may appear during CLI (Command Line Interface) operations.
Ambiguous command
A
. This message indicates either a) the input for one of the parameters is incorrect, or b) a hyphen is
missing between two parts of the command.
1. Verify the CLI command syntax.
2. Retry the operation.
B
. You typed part of a valid CLI command and pressed
Enter
before completing the command syntax.
For example, if you type
C1|S7|L1D>
add v
and then press the
Enter
key, the message “
% Ambiguous command.
” displays.
1. Type the part of the command that failed (
add v
in the example above), type a question mark (
?
), and
the press
Enter
. The valid commands that start with the part of the command you initially entered are
displayed.
2. Verify the CLI command syntax.
3. Retry the operation.
C
. The system was unable to resolve the desired command based on the portion of the command
entered. For example, you entered the following: C1|S7|L1D>set dot1
1. Verify the command syntax.
2. Retry the CLI command syntax.
3. See the
x4120 CLI Reference Manual, 33497
.
4. If the problem persists, contact Technical Support.
