Lantech LES-2400-RPS User Manual Download Page 16

Page: 16 / 99

Power On

Connect the 3-prong AC power cord or the 14-pin 2-row DC power cable to the power

socket at the rear panel of the Ethernet switch. The Ethernet switch can work with AC

power in the voltage range of 100-240V/50~60Hz or 12-48VDC. The AC and DC inputs

can be used for redundant power supply. If one of the power inputs fails, the other one

is able to keep providing power to the Ethernet switch. Check the power LED indicator

on the front panel to see if power is properly supplied.

Redundant power

Connect the optional redundant power cord to the redundant power socket on the rear

panel of the Switch. The other side of redundant power cord connects to the power

supply. The Switch works with power supply of 12-48 VDC.

Please make sure the connection on power supply is correct when using the optional

redundant power cord. Red cord should be co

nnected to ―+‖ and black cord should be

connect to ―-‖.

Summary of Contents for LES-2400-RPS




































































































Search results

Summary of Contents for LES-2400-RPS

Reviews:

Related manuals for LES-2400-RPS

Brands by name

Popular brands

Lantech LES-2400-RPS, User Manual

Search results

Summary of Contents for LES-2400-RPS

Reviews:

Related manuals for LES-2400-RPS

Brands by name

Popular brands