Lantech LES-2400-RPS, User Manual

Page: 55 / 99

51
State Activity
Having configured the LACP aggregator on the Aggregator Setting tab, you may
want to change the state activity for the members of the LACP trunk group. You can
tick/untick the checkbox beside the state label. If you remove the tick mark of the
corresponding port and click the Apply button, the port state activity will change to
Passive .

Active: The port automatically sends LACP protocol packets.

Passive: The port does not actively send LACP protocol packets. It responds only
if it receives LACP protocol packets from the opposite device.
[NOTE] A link having two passive LACP nodes will not perform dynamic LACP
trunk because both ports are waiting for an LACP protocol packet from
the opposite device.
Port Trunk
– State Activity interface