Lantech LES-2400-RPS, User Manual

Page: 53 / 99

49

The system allows a maximum of four ports to be aggregated in a trunk group.
Having configured the parameters above, highlight the ports in the right list box to
join the trunk group. Click the Add button and the ports highlighted in the right list
box will be shifted to the left list box. To remove unwanted ports, select the ports in
the left list box and click the Remove button.

When LACP enabled, you can configure LACP Active/Passive states for each
member port on the State Activity tab.

When finished, click Apply to take the configuration take effect.

To remove a trunk group, select the Group ID by clicking the pull-down menu
labeled as
‗Group ID‘ and click then click the Delete button.
Port Trunk
—Aggregator Setting interface