Lantech LES-2400-RPS, User Manual

Page: 90 / 99

86
Access Control List
The switch provides a 256-entry access control list (ACL) to check IPv4/non-IPv4
addresses and TCP/UDP port numbers of packets.

Group Id: Type in the Group ID from 1 to 255 for the access control list being
configured.

Action: Click the pull-down menu to select Permit or Deny for the control list.
Permit means traffic checked against this access control list will be processed. As
for Deny , traffic will be dropped.

VLAN: Select one of the radio buttons to determine packets entering any or a
particular VLAN will be checked against this control list.

Packet Type: Select the packet type
—IPv4 or Non-IPv4

Src IP Address: Select any or assign an IP address with Subnet Mask for source
IP address.

Dst IP Address: Select any or assign an IP address with Subnet Mask for
destination IP address.

Ether Type: Click the pull-down menu to select Any, ARP or IPX for Ether type.

IP Fragment: Click the pull-down menu to determine whether the fragment is
checked or not.

L4 Protocol: Select the L4 protocol from among ICMP(1), IGMP(2), TCP or UDP.

Current List: This field displays entries of the access control list.