Lantech LES-2400-RPS, User Manual

Page: 71 / 99

67

Enable Coupling Ring: To enable the coupling ring function. Marking the check
box to enable the coupling ring function.

Coupling port: Assign the member port.

Control port: Set the switch as the master switch in the coupling ring.

Enable Dual Homing: Set up one of port on the switch to be the Dual Homing
port. In an X-Ring group, maximum Dual Homing port is one. Dual Homing only
work when the X-Ring function enable.

And then, click to apply the configuration.
X-ring Interface
[NOTE]
1. When the X-Ring function enable, user must disable the RSTP. The X-Ring
function and RSTP function cannot exist at the same time.
2. Remember to execute the
‗Save Configuration‘ action, otherwise the new
configuration will lose when switch power off.
X-Ring I
Recovery time table
X- Ring
Couple
Ring
Dual Homing Dual Ring Central Ring
Recovery Time(ms)
(Using 1G Fiber Cable or
100Mb Copper Cable)
10 150 150~6000 10 10
Recovery Time(ms)
(Using 1G Coppor Cable)
150 150 150~6000 150 150