Connect the ground stud
Connect the ground stud on the ODU enclosure with the ground wire.
Mounting the 802.11g Outdoor Multi-function Radio
The outdoor radio is usually installed on a rooftop, tower, wall, or a suitable flat
surface. For detailed mounting instructions, please refer to the Quick Installation
Guide.
You should read and carefully follow the installation instructions before
connecting the system to its power source. The outdoor radio and power
injector can be damaged by incorrect power application.
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available.
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
Wind the water-resistant adhesive tape around the RJ-45 and N-type
connector on the outdoor radio enclosure as the last step of the mounting
Procdures.
www.lanpro.com
