Destination
This specifies where packets are bound for.
This specifies the starting-point of your specific IP addresses.
This specifies the ending-point of your specific IP addresses.
This is optional, TCP, DCP, ICMP or *. Select which protocol you want to perform “Allow”
or “Deny”.
This specifies your IP port range.
You can set time when your AP performs firewall management, by enabling “from”.
Alternatively, if you desire your AP to perform firewall management for a long time, please
enable “always”.
You can set the bandwidth with n*64Kb / per second to limit the data flow.
When completing all firewall rules configuration, please click Add Rule. Firewall Rule List
will appear below.
Figure: 4-6 Firewall list
•IP Range Start
•IP Range End
•Protocol
indicates you restrict no protocol to perform “Allow” or “Deny”.
•Port Range
•Schedule
•Bandwidth
www.lanpro.com
