8-2 Connection Issues
This section describes several common troubles the customer might have while
setting the radios.
When the Radio does not Boot, do the following steps to check your whole system:
1. Ensure that the power supply is properly working and correctly connected.
2. Ensure that all cables are workable and connected correctly.
3. Check the power source.
If the radio boot, but can’t enter it via the Web site.
1. Open a command prompt window and enter ping <ip address unit> (for example:
ping 192.168.1.1). If there is no response from the radio, make sure that you
the IP address is correct. If there is response, the Ethernet connection is working
properly, do the next step.
2. Make sure that you are using one of the following Web browsers:
*Microsoft Internet Explorer version 5.0 or later
*Netscape version 5.0 or later.
3. Ensure that you are not using a proxy server for the connection with your Web
Browser.
4. Double-check the physical network connections (includes the cables and the
connectors). Use a well-known unit to ensure the network connection is properly
Functioning.
Radio Does Not Boot
Cannot use the Web Interface
www.lanpro.com
