4-2 Bridge/Router Mode
From the system setup, click IP Settings, you’ll be navigated into the WAN/LAN Settings.
Figure: 4-2 AP WAN/LAN settings
This radio can be figured as bridge mode and router mode.
Under Bridge Mode, the AP will act as a pass-through bridging your network, by
associating with various devices. This can extend your radius of your network.
Spanning Tree: Enabling spanning tree can prevent undesirable loops in the network,
ensuring a smooth running network. By default, the function is enabled.
Under Router Mode, the radio has two ports, WAN port and LAN ports.
If your network has a requirement to use a different IP addressing scheme, you can make
those changes in this menu. These settings are only required if the Refresh” is chosen.
Remember to click Apply to save your changes.
Bridge Mode
Router Mode
www.lanpro.com
