in the field provided. WEP should be used to protect this communication.
•Point to Multi-Point Bridge
Select this only if this AP is the “Master” for a group of bridge-mode wireless stations. The
other bridge-mode wireless stations must be set to Point-to-Point Bridge mode, using this
AP MAC address. They then send all traffic to this “Master”, rather than communicate
directly with each other.WEP should be used to protect this traffic.
•Wireless Repeater: In this mode, the AP can communicate with another wireless station
or wireless bridge. You can enter the MAC address of both adjacent repeaters in the fields
provided to communicate with other wireless bridge or use SSID to communicate with
other wireless station. WEP should be used to protect this communication.
•Inter-building
This is own brand of WDS mode. Under this mode, AP will automatically connect to our
11b radio which is set to inter-building mode too, without manually entering MAC address
for each other.
Select the desired wireless operating mode. The default mode is
Auto(802.11g/b).
This field identifies which operating frequency will be used.
This provides a list of virtual APs derived from AP Virtual AP, spelling
out profile name, SSID, MAC, security, and status.
Wireless Mode:
Channel:
Security Profiles:
www.lanpro.com
