Lanier LD225, Function Manual

Page: 88 / 138

Configuring/Registering Scan Settings
80
7
B
Make settings for original orien-
tation,Batch/SADF, mixed origi-
nal sizes, divide, and stamp by
pressing
[ Original Feed Type ] .
Orientation selection
A
Press the key for the same ori-
entation as the actual orienta-
tion of the original, or .
Reference
For details about the orienta-
tion of the original and the
orientation setting, see p.117
“Placing Originals”.
Batch/SADF selection
A
When scanning a large number
of originals by dividing the
originals and scanning them
individually or in batches,
check that either
[ Batch ]
or
[ SADF ] is selected.
Note
❒
Either [ SADF ] or [ Batch ] ap-
pears. If the mode you want
to select does not appear,
change the mode in
[ Switch to
Batch ] of [ Scanner Features ] .
For details, see p.106 “Switch
to Batch”.
❒
To enable [ Wait Time for Next
Original(s): SADF ] in [ Scan Set-
tings ] , select [ SADF ] . For de-
tails, see p.106 “Wait Time
for Next Original(s): SADF”.
❒
If you select [ Batch ] , the ma-
chine waits for further origi-
nals, regardless of the system
setting.
Mixed size selection
A
When originals of different siz-
es are placed, select
[ Mixed Sizes ] .
Note
❒
Originals of different sizes
are scanned differently, de-
pending on the settings and
the positions of the originals.
See. p.119 “Scanning Docu-
ments of Different Sizes”.
Specifying Divide
A
If you want to divide and send
a file containing multiple pag-
es, press
[ Divide / Stamp ] , and
then [ Divide ] .
B
Press [ Change ] , and then enter
the number of divisions using
the number keys.
C
Press the
{
#
}
key.
D
Press [ Division Check ] if neces-
sary.
Note
❒
If you select [ Division Check ] , a
screen for stopping or contin-
uing scanning appears if the
originals are scanned out of
order because of a paper jam
or sheets feeding together.
E
Press [ OK ] twice.