Section 1: Assembly & Set-up
OFM3678, OFM3690 & OFM3698 Offset Flail Mowers 333-149M
6/11/21
27
Driveline Maximum Length
Figure 1-24
Measure Driveline Maximum Length
Refer to Figure 1-24:
Driveline maximum length must, when fully extended,
have 1/3 overlap of the profile tubes with both inner and
outer profile tubes being of equal length as shown in
Figure 1-24. Check driveline maximum allowable length
as follows:
1. Make sure
“Check Driveline Collapsible Length”
on page 26 has been completed before continuing
with instructions below.
2. Apply multi-purpose grease to the inside of the outer
shaft.
3. Assemble the two driveline profiles together with just
1/3 overlapping of the profile tubes as shown.
4. Measure driveline “Maximum Allowable Length” and
record here ______.
24513
Outer Shielding has been removed for clarity.
