Section 1: Assembly & Set-up
OFM3678, OFM3690 & OFM3698 Offset Flail Mowers 333-149M
6/11/21
16
Hose Assembly
Figure 1-5
Hose Assembly
Refer to Figure 1-5:
The hydraulic hoses ship assembled to the hitch frame
and lateral arms. All that remains to be assembled is to
attach hoses (#1 & #2) to hydraulic cylinder (#4).
1. Attach the shorter hydraulic hose (#1) to incline
cylinder port (#3).
2. Attach the longer hydraulic hose (#2) to incline
cylinder port (#5).
3. Tighten hydraulic hoses (#1 & #2) to the ports.
3
2
4
76100
4
5
1
Preliminary Checks & Inspections
WARNING
!
To prevent serious injury or death:
Never use the machine if it does not appear to be fully
consistent with the usage and safety characteristics, as the
minimum necessary safety requirements could be
compromised.
h
h
Upon delivery, inspect the machine thoroughly to ensure
that there are no damaged parts or defects.
Also verify the receipt of all the components necessary
for its use, including both standard and optional
equipment.
The implement leaves the factory in perfect working
order. However, the dealer must check the following upon
delivery to the customer:
•
That the three-point linkage is assembled correctly.
•
That the oil levels in the gearbox and upper
transmission case are correct.
•
That grease has been injected correctly at all grease
nipples.
•
That all the safety decals indicated in this manual are
applied correctly and legible.
•
That all bolts and nuts are tightened correctly.
•
That all guards are in place and fitted correctly.
•
That, in general, the machine shows no signs of
defects.
IMPORTANT:
If any damaged parts, defects, or
deficiencies are encountered in relation to the
machine, whether due to transport or other causes,
contact the manufacturer immediately in order to
have the issues immediately resolved.
IMPORTANT:
For shipping reasons, certain
components may not be installed on the implement.
You may install these yourself provided that you
have the necessary skills. If you do not, have them
installed by your dealer.
