To tighten the door on the handle side – loosen the
two set screws, lower handle behind latch, push door
in tightly and tighten set screws. (Figure 9)
When adjusting doors, loosen the two screws (Fig-
ures 13 & 14) and push door in until there is a slight
bind. As you close the door, making sure it is not too
tight, tighten the screws.
Figure 9
Figure 13
Figure 14
Door
HanDLe
Door
LatCH
aDjuSt SCreW
HInGe PIn
HInGe PIeCe
Door FraMe
FIre Door
PIVot SCreW
aDjuStMent
SCreWS
SIDe PIeCe
LatCH
BOX 422 • TOWER, MN 55790 • USA • Tel (218) 753-2330 • www.lamppakuuma.com
9
Figure 25
Figure 7
aDjuStaBLe HInGe For tHe DoorS
HInGe
BoLtS
Door
GaSket
SteP Motor
ControL
PLuGS Into
CIrCuIt BoarD
VIa FLat CaBLe
