Lambrecht Ser[LOG], Operator'S Manual, Page: 91 / 129

LAMBRECHT meteo GmbH Ser[LOG] Manual Page 91 of 129
11 Other functions - USB stick readout
As described in chapter 3.2, data can be exported via the USB interface directly on the Ser[LOG] with a
USB memory stick. The configuration of the Ser[LOG] is always saved with the measured values on the
USB stick. This configuration can either be loaded directly via the USB stick to another Ser[LOG] or read
out together with the stored measured values using the Ser[LOG]-Commander.
To do this, click on the button to access a menu that can be used to access other
functions, some of which are rarely used. See also chapter 4.8.
One of these functions "Read USB stick" reads the configuration from the USB stick and, if it does not
yet exist, creates it automatically in the station database of the Ser[LOG]-Commander.
At the same time, the measured values stored on the USB stick are read out and saved in a CSV file.
This enables fast data export if the stored measured values have been collected manually.
The small application prompts you to insert the USB stick into the PC. By pressing the button
"OK" the detected removable drives are displayed and can be selected in the field "removable drives".
If the correct drive is not included or if the USB stick has not yet been inserted, the drive list can be
updated by clicking the button.
Pressing the "OK" button again loads the data from the USB stick!
Important note: The application asks after downloading the data whether the USB stick should
be deleted! It is therefore recommended to use a USB stick that is only intended for data export
and does not contain any other important data!