Lambrecht Ser[LOG], Operator'S Manual

Page: 55 / 129

LAMBRECHT meteo GmbH Ser[LOG] Manual Page 55 of 129
• Standard
Linear scaling according to y=ax+b, where "a"
and "b" are calculated from the signal minimum,
signal maximum, value minimum and value
maximum.
•
PT100
Can be used for the measuring range 500Ω es-
pecially for the use of Pt100 temperature sen-
sors. In this case, a polynomial stored specifi-
cally for Pt100 sensors is used for scaling.
• PT1000
Can be used for measuring range 5000Ω espe-
cially for the use of Pt1000 temperature sensors.
In this case, a polynomial stored specifically for
Pt1000 sensors is used for scaling.
•
Polynom
Allows the use of a 5th-order polynomial for scal-
ing the selected measuring range.
• Look_Up_Table_1
Scaling with the use of up to 15 calibration points
in table 1.
See also chapter 5.3.6.4 Configuration of sen-
sors with look-up table
• Look_Up_Table_2
Scaling with the use of up to 15 calibration points
in table 2.
See also chapter 5.3.6.4 Configuration of sen-
sors with look-up table
Example: Sensor type “Polynom”