Lambrecht Ser[LOG], Operator'S Manual

Page: 39 / 129

LAMBRECHT meteo GmbH Ser[LOG] Manual Page 39 of 129
4.8 Function “Sensor definition“
By pressing the button you open the window for defining new sensors. It is possible to create
new sensors for the sensor library for all sensor types. (Sensor definitions can be created for analogue,
digital (counter or frequency or status), serial, SDI-12, Modbus and virtual sensors.
Important note: Be careful when configuring new sensors. The approach to ensure the greatest possi-
ble flexibility in configuration also makes it possible to create "nonsensical" sensor configurations that
could interfere with the operation of the Ser[LOG]. It is therefore recommended to work with the prede-
fined sensors or to derive new sensors from existing sensors!
4.9 Function “Actuator definition“
Click on the button to open the window for defining new actuators (Modbus relays).
Actuators (Modbus relays) are considered as single channels like Modbus sensors and not as Modbus
devices. For each relay, a separate definition is created to allow Ser[LOG] to control external relays.
Deletes the currently open sensor. Factory defined sensors cannot be de-
leted.
Opens a new "empty" data entry for the creation of a new sensor.
Copies the currently opened sensor definition and displays a window for as-
signing a new name for the sensor.
Saves the currently opened sensor. Changes in factory defined sensors can-
not be saved.
Exit function. Exits the tool and closes the window.
Deletes the currently open actuator. Factory defined actuators cannot be de-
leted.
Opens a new "empty" data input for the creation of a new actuator.
Copies the currently opened actuator definition and displays a window for
assigning a new name to the actuator.
Saves the currently opened actuator. Changes in factory defined actuators
cannot be saved.
Exit function. Exits the tool and closes the window.