LAI Games HYPERshoot Operator'S Manual Download

Page: 42 / 94

FB216 UPDATE PROCEDURE

TOOLS REQUIRED

•

1 x USB

–

TTL Serial Adapter with Connector Harness

•

1 x PC or Laptop with USB Port running a Windows OS (will be connected to game during the
update, so must be portable)

•

1 x Computer Program FLASHER-STM32

•

1 x HEX File (containing PCB update)

PC SETUP

FLASHER-STM32

The program FLASHER-STM32 needs to be downloaded and installed on the PC

Visit

www.st.com

In the search bar at the top of the page, search for FLASHER-STM32

Select the suggested result from the Products category

Alternatively, in the navigation menu on the left, select:

Tools & Software

Software Development Tools

Product Tree (on the right)

STM32 Software Development Tools

Scroll down, and select FLASHER-STM32 from the list

Scroll to the bottom of the product page, and select the “Get Software” button

You will need to enter your name and email address to confirm the download

Once the software is downloaded, install it on the PC

Summary of Contents for HYPERshoot































































































Search results

Summary of Contents for HYPERshoot

Reviews:

Related manuals for HYPERshoot

Brands by name

Popular brands

LAI Games HYPERshoot, Operator'S Manual

Search results

Summary of Contents for HYPERshoot

Reviews:

Related manuals for HYPERshoot

Brands by name

Popular brands