LAI Games HYPERshoot, Operator'S Manual

Page: 32 / 94

32
BASKET SENSOR
The basket sensor calibration ensures it properly detects any balls that pass through the basket.
Incorrect calibration will result in the ball not being detected when passing through the basket or the
ball being incorrectly detected when outside the basket. The sensor can be adjusted to increase and
decrease the sensitivity, until the balls are detected correctly.
Two sensors need calibrating in the same manner:
1.
Turn the adjustment screw all the way in one direction using a small fine flat screwdriver, taking
care not to use too much force. The adjustment screw is accessible from behind the cabinet.
2. Adjust the calibration screw while passing a ball through the basket, taking note that the
situations below are met. The red LED turns on when the ball is detected.
•
Ensure that the ball is not detected when the ball is at the below three positions outside
the basket. Move the ball up and down outside the basket and ensure the sensor LED
never turns on. If the LED
does turn on, decrease the sensitivity of the sensor.
•
Ensure that the ball is detected when the ball is at the below four positions inside the
basket. Move the ball up and down through the basket and ensure the sensor LED turns
ON with each pass of the ball. If the LED
does not turn on, increase the sensitivity of the
sensor.
•
Continue to tweak the sensitivity of the sensors, testing the ball in the above positions.