LAI Games HYPERshoot, Operator'S Manual

Page: 39 / 94

39
BALL GATE
The ball gate consists of a geared motor which raises and lowers a “gate” to hold the balls. The
motor stops when it hits switches at the extent of travel.
Ensure the switches are intact and make contact with the gate lift arm.
BACKBOARD DISPLAYS
FB63 7-Segment Display PCBs are used to display the game time remaining, and the current points
per basket. Access is from the rear of the game.
LED LIGHTING/FB215
16 independent LED lighting channels are used in HYPERshoot . Each channel is fused and driven by
the FB215 PCB.
Channels 1-10 are used on the chase lights
Channel 11 is the basket
Channel 12 is the backboard
Channel 13, 14 is the rear lower floor lighting.
Channel 15 is the player panel and ball stopper
Channel 16 is the front floor lighting.
FB215 is controlled by the FB216 Game Control Board.
PLAYER PANEL
Access to the panel components is by removing the front face of the player panel. The player panel
consists of the edge mounted LED lighting, speaker system (midrange, tweeter, crossover), display
PCBs and player buttons.
SPEAKERS
Two component speakers are wired to the left and right outputs from the amplifier. Each speaker
pair consists of a crossover, midrange speaker and tweeter speaker.
AMPLIFIER/FB106/SUBWOOFER
The FB106 is the sound driver board containing the sound files. The volume can be adjusted by the
potentiometer located on the operator panel.
An extra amplifier is included to drive a subwoofer. The adjustment knobs on this amplifier have
been set by the manufacturer and should be left in default positions.
OPERATOR PANEL COUNTERS
Counters will increment for each coin inserted and each ticket paid out. Counters are under
firmware control and are not directly connected to the mechanisms.
OPERATOR PANEL BUTTONS
Press the green SERVICE/BACK button to issue a service credit from attract mode. Press and hold the
green SERVICE/BACK button to enter temporary Free Mode, this will remain in place until machine
power is reset.
Press the red TEST/ENTER button to enter the operator menu from attract mode.
When in the operator menu, use four up/down/left/right buttons to navigate through the menu.