Laguna Tools MCNC Creator Pro I-24P, Manual

Page: 48 / 66

MCNC Creator Pro I-24P
48
7.1.2 System Updates
Occasionally as software evolves, updates may become available for the controller firmware.
When this happens, the updates may be supplied to customers by Laguna Tools.
Much like the Backup/Restore files, the current version of the firmware Update may be used to
correct certain controller software settings.
To install a System Update (Emergency State Option) for use when the Menu cannot be
accessed:
Save the supplied file to a USB flash dive.
1. With the machine powered OFF, insert the drive into the controller.
2. Enter the Emergency State mode by holding down the OK button as the machine is turned
OK. Release the OK button once the loading screen appears.
3. Select Update System.
4. Select the location of the file (U-Disk or internal memory).
5. Select the file.
The update will begin automatically. Once complete the controller will display a prompt indicating
that the update has been successful. The controller will need to be restarted to complete.
After restarting the machine, normal operation may be resumed.
7.1.3 Normal Menu Option
Save the supplied file to a USB flash drive.
1. With the machine powered ON insert the drive into the controller.
2. From the main coordinates scree, press the MENU button.
3. Scroll down and select System Setup.
a. Select Update System.
b. Select the location of the file (U-Disk or internal memory).
c. Select the file.
Again, the update will begin automatically. Once complete the controller will display a prompt
indicating that the update has been successful, the controller will need to be restarted to
complete.
After restarting the machine, normal operation may be resumed.