Laguna Tools MCNC Creator Pro I-24P, Manual

Page: 42 / 66

MCNC Creator Pro I-24P
42
6.3 Mirror Work
Allows a job to be mirrored on either the X or Y-axis (it is recommended using an Origin point in
the center of the material).
6.4 Tool Changing
While the controller does not allow automatic tool-changing as an option, there are other helpful
selections available.
This option, when selected will bring the router head to the HOME position for tool-changing. The
controller will display a prompt to press the OK button when finished.
This will return the router head to the previous location.
CAUTION
There will not be a prompt for a Z-Axis Tool Touch-Off. To
avoid damage to the machine or job material, the Z-0 point
must be set before continuing.
6.5 Stop State (Back Position)
In addition to the above option (Advanced Processing Tool-Changing), there is another option
which can be more effective specifically when using fixtures.
The Stop State shares some similarities with the Origin point since it will allow a defined location
that can be programmed anywhere within the machine limitations.
This point must be activated in the controller software before being programmed. Once complete,
the machine will go to the programmed at the end of each process (location can be changed as
needed).
To program a Stop State:
1. From the coordinate screen, press MENU.
2. Select Auto Pro Setup, then scroll down to find the Stop State.
3. The Work Stop State menu will be displayed which has several options.